COMANDOS PARA "ENRUTAMIENTO" DE REDES "VLSM" TIPO "A" - Protocolo RIP y EIGRP

Que tal gente, saludos a todos mis estimados lectores, de regalo les dejaré un trabajo que al inicio me parecía complicado, pero que con el tiempo de dedicación que le he tomado he logrado asimilar la lógica de lo que sería el enrutamiento de redes, en esta ocasión les comparto la primera parte que es el ripeo de redes VLSM tipo A, en la imagen pueden observar la forma detallada en que debería de quedar el formato, posteriormente estaré actualizando este trabajo para que lo tengan completo, si tienen algo que aportar sería bueno que me lo hagan saber, adjunto el video del profesor Ing. Jherson de Jesús Alvarado Picado de apoyo.

*COMANDOS RIP (EJERCICIO 1)*

*ROUTER 1*

Router> en

Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# router rip

Router(config-router)# network 33.127.255.253

Router(config-router)# network 34.36.0.1

Router(config-router)# network 34.36.0.9

Router(config-router)# version 2

Router(config-router)# no auto-summary

Router(config-router)# exit 

*ROUTER 2*

Router> en

Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# router rip

Router(config-router)# network 33.255.255.253

Router(config-router)# network 33.255.255.254

Router(config-router)# network 33.128.0.1

Router(config-router)# version 2

Router(config-router)# no auto-summary

Router(config-router)# exit 

*ROUTER 3*

Router> en

Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# router rip

Router(config-router)# network 34.31.255.253

Router(config-router)# network 34.0.0.1

Router(config-router)# network 34.31.255.254

Router(config-router)# version 2

Router(config-router)# no auto-summary

Router(config-router)# exit 

*ROUTER 4*

Router> en

Router# config t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# router rip

Router(config-router)# network 34.35.255.253

Router(config-router)# network 34.35.255.254

Router(config-router)# network 34.32.0.1

Router(config-router)# version 2

Router(config-router)# no auto-summary

Router(config-router)# exit

*COMANDOS EIGRP (EJERCICIO 2)*

ROUTER1>en
ROUTER1#config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
ROUTER1(config)#router eigrp 1
ROUTER1(config-router)#network 33.127.255.253 0.127.255.255
ROUTER1(config-router)#network 34.36.0.1 0.0.0.3
ROUTER1(config-router)#network 34.36.0.9 0.0.0.3
ROUTER1(config-router)#no auto-summary
ROUTER1(config-router)#exit


*****ROUTER 2******

Router#enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 1
Router(config-router)#network 33.255.255.253 0.127.255.255
Router(config-router)#network 34.36.0.2 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 34.36.0.1 (GigabitEthernet0/2/0) is up: new adjacency

Router(config-router)#network 34.36.0.5 0.0.0.3
Router(config-router)#no auto-summary
Router(config-router)#exit
Router(config)#exit

*****ROUTER 3 *****

Router>enable
Router#config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 1
Router(config-router)#network 34.31.255.253 0.31.255.255
Router(config-router)#network 34.36.0.6 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 34.36.0.5 (GigabitEthernet0/2/0) is up: new adjacency

Router(config-router)#network 34.36.0.14 0.0.0.3
Router(config-router)#no auto-summary
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
exit

*****ROUTER_4*****

Router>enable
Router#config terminal
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#router eigrp 1
Router(config-router)#network 34.35.255.253 0.3.255.255
Router(config-router)#network 34.36.0.13 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 34.36.0.14 (GigabitEthernet0/2/0) is up: new adjacency

Router(config-router)#network 34.36.0.10 0.0.0.3
Router(config-router)#
%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 34.36.0.9 (GigabitEthernet0/3/0) is up: new adjacency

Router(config-router)#no auto-summary
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
exit

Adjunto un video que realicé para demostrarle que sí me funcionaron los códigos.